home *** CD-ROM | disk | FTP | other *** search
- Path: newshub.ccs.yorku.ca!news
- From: jfairley@yorku.ca (John C. Fairley)
- Newsgroups: comp.sys.cbm
- Subject: Re: MSD-1 w/ PET...8032 w/ 96
- Date: 5 Mar 1996 07:24:53 GMT
- Organization: York University, Ontario, Canada
- Sender: jfairley@comoro.yorku.ca
- Distribution: world
- Message-ID: <4hgq85$n0d@sunburst.ccs.yorku.ca>
- References: <4g0ggr$a8s@klein.iguide.com>
- <60.4794.4516.0N20B02D@canrem.com> <4g31i6$v87@klein.iguide.com>
- <4gd00j$48e@spacenns.space.honeywell.com>
- NNTP-Posting-Host: elaine01.slip.yorku.ca
- X-Posted-From: InterNews 1.0.1@elaine01.slip.yorku.ca
- X-Authenticated: jfairley on POP host comoro.yorku.ca
-
- >>Then which *Commodore* EPROMS belong in the UD-11 & UD-12
- >>sockets?
- >
- >None needed. CBM did produce the option ROMs for some third-party companies
- >(my Visicalc ROM has an MOS part number, for example), but you don't need
- >anything in those sockets. That said, perhaps your first step is removing
- >those and seeing if it boots.
-
- I did remove a chip from the UD-12 slot <paperclip 2.8> becuase quite
- frankly I couldn't figure out what it was <it's been a long time since
- I've used a PET>, and the machine still runs fine.
-
- Q: anyone know how I get to, and run Paperclip?? My PET commands are
- just about all gone.. the only thing I remembered was SYS64798...
-
- "Laugh while you can Monkey Boy" - John Bigboote
- jF jfairley@yorku.ca
-